Brief introductrion: it is suitable for dehumidification and drying of electric wires and cables using drying tunnels or oven.
Brief introductrion: it is suitable for dehumidification and drying of electric wires and cables using drying tunnels or oven.
1, Good temperature uniformity within the oven furnace, and the temperature fluctuation is always kept within a + / - 3 ℃ range under the constant temperature of 100 ℃ within the entire furnace.
2, Good performance in heat preservation , the temperature of oven surface (except for special position) is at most 15 ℃ higher than temperature plus,thus achieving the purpose of energy saving;
3,The oven structure is compact along with a reasonable layout, small occupation, which helps reduce heat radiating area;
4,The use of self-driven electric truck make it convenient and easy to operate to put workpiece into and out of the oven;
5. The flat car and the box are sealed in two ways to reduce the heating area of the oven and hence the heat loss of the oven in order to ensure the low temperature environment of the flat car’s driving part;
6. The air outlet of the air duct of the oven is equipped with a windscreen, which can adjust the wind direction to control the heat distribution, which is conducive to the heating of the workpiece;
7. Forced exhaust device is installed on the top of the oven to reduce environmental pollution from the workshop.
| Parameter | HL-1 | HL-2 |
| Dimension of working chamber (width x depth x height) ）mm | 1500×2200×2200 | 2000×2700×2700 |
| Dimensions (width x depth x height)mm | 2000×2400×3200 | 2500×2900×3700 |
| Operating temperure（℃） | Indoor temperature--150 | Indoor temperature--150 |
| Operating voltage/frequency（V/ Hz） | 3-380/50 | 3-380/50 |
| Heating power（kw） | 30 | 54 |
| Temperature uniformity（%） | ±2.5 | ±2.5 |
| Temperature fluctuation（℃） | ±1 | ±1 |
| Trolley drive mode | manual | manual |
| Air exchange volume (adjustable)（ M3/H） | 500 | 1000 |
| Weight（T） | 3.5 | 5 |
Scan the code to follow us
